High efficiency boiling dryer after the acceptance criteria

High efficiency boiling dryer Features:
The fluidized bed is rounded to avoid dead ends.
Hopper set to stir, to avoid damp material agglomeration and dry when the formation of ditch flow.
The use of dump dump discharge, easy and rapid filtration. The automatic access system can also be designed as required.
Sealed negative pressure operation, air flow through the filter. Easy to operate, easy to clean, is in line with "GMP" requirements of the ideal equipment.
Drying speed, humidity uniform, each batch of drying time are generally 20-30 minutes.
According to the minimum feeding capacity of 150kg, the wet granule 150 kg of the Qingqi granule of our factory should complete the drying operation of the batch in 60min under the normal operating procedure. After the completion of the dry granule, Factory quality requirements, the material in the fluidization process does not agglomerate, boiling uniform, not collapse, dry uniform, the final material yield of 98% or more.
Repeat this operation three times in succession, should meet the above requirements, can be regarded as the transformation of the equipment acceptance.
Increase the cylinder height, increase the fluidization space.
Increase the height of 200mm
Into the wind into the wind into the wind, heat exchanger, into the air pipe word arrangement.
Increase the duct about 10,000mm
High efficiency boiling dryer host configuration negative pressure on the material hole.
The air intake throttle actuator can automatically adjust the damper.
Throttle actuators use imported brands
The filter bag is coated with a filter bag.
Installation of the equipment in accordance with the requirements of the installation of high efficiency boiling dryer.