Double cone vacuum dryer to energy efficient as the goal to develop

Double cone vacuum dryer Features:
1, the machine for the pharmaceutical, chemical, food, dyes, metallurgical powder and other industries powder granular material drying.
2, the aircraft structure is compact, smooth operation, easy to operate. Reduce labor intensity, save labor.
3, due to the operation in a vacuum state, at a lower temperature have a greater drying rate, saving energy, high heat utilization.
4, closed and dry, suitable for oxygen and dangerous materials, the general material can also reduce the leakage and impurities mixed with the opportunity to obtain a higher purity products.
5, the machine is particularly suitable for heat-sensitive materials, dry, containing solvent or toxic gas materials, in the dry when it is convenient to collect these gases.
6, the material can be dried to a very low water content, and dry uniform, good quality.
Double cone vacuum dryer works:
SZG double cone vacuum dryer for the double cone of the rotating tank, the tank in a vacuum state, into the jacket through the steam or hot water for heating, moisture absorption after evaporation of water vapor through the vacuum pump by the vacuum exhaust pipe Take away. As the tank is in a vacuum state, and the tank of the material to keep up and down, inside and outside the flip, thus speeding up the drying rate of materials to improve drying efficiency, to achieve the purpose of uniform drying.
The double cone vacuum dryer is a new type of dryer which is mixed and dried. The condenser, vacuum pump and dryer to form a vacuum drying device. (Such as the need to recover the solvent, the condenser can not) The machine design is advanced, the internal structure is simple, easy to clean, the material can be discharged, easy to operate. Can reduce the labor intensity to improve the working environment. At the same time because the container itself when the material is also rotating the material but the container is not accumulated, so the heat transfer coefficient is high, the drying rate, not only save energy, and the material is dry and uniform, good quality. Can be widely used in pharmaceutical, chemical, food, dyes and other industries dry materials. Meet the requirements of "GMP".