CT series of medical oven without automatic control, using 4-72 centrifugal fan, CT-C series oven all use axial fan, equipped with automatic temperature system, and equipped with computer control system selection.
Medical oven is a general drying equipment, suitable for a wide range of interdisciplinary drying equipment, used in pharmaceutical, chemical, food, light industry, heavy industry raw materials, product heating and dehumidification.
Medical oven after several upgrades have reached the more advanced level at home and abroad. CT series of medical oven for the first generation of products, the average thermal efficiency of about 30%, the use of centrifugal fan, box outside the medical hot air oven, manual temperature control. After several transformation, the formation of the CT-C series of medical oven, the series of medical oven all axial fans, equipped with automatic temperature control system, and equipped with computer control system for choice. Thermal efficiency of about 70% of the scope of medical hot air oven, CT-C series of medical oven is the use of steam or electricity as a heat source, with axial fans on the heat exchanger convection heat way heating air, hot air laminar flow through the baking tray and materials Heat transfer. Fresh air from the air inlet to add, waste hot and humid air discharged from the drain, constantly add fresh air and constantly discharge hot and humid air medicine hot air oven temperature, so as to maintain the appropriate relative humidity inside the oven. The characteristics of this series of ovens is part of the hot air in the box for the cycle, the entire cycle of the closed, thereby enhancing the heat transfer, saving energy.
The medical oven is an alternative product of the traditional drying room. After several upgrades, the thermal efficiency of the medicine oven is increased from the traditional drying room by 3-7% to the present 45%, up to 50% or more, and it is more advanced at home and abroad. Level. And in 1990 by the State Pharmaceutical Administration issued the industry standard, unified model RXH, it is the use of steam to add, and then discharged from the drain, and constantly add fresh air and constantly discharge hot and humid air, so as to keep the oven appropriate Relative humidity. The characteristics of the medical oven is that most of the hot air circulates in the box, thereby increasing heat transfer and saving energy. It is the use of forced ventilation to reduce the temperature up and down. Jiayuan factory oven, are equipped with sub-wind device, the user can be used before the fan adjustment, so that the upper and lower temperature in a better state.