Drying equipment customer selection feedback form |
Please fill in the form in detail so that our company can give you a careful selection |
|
|
1. Material Name:
Molecular Formula:
PH value:
|
|
|
|
3. Other characteristics of material:
Flammability
Explosive property
Agglomeration
Smell Other:
|
|
4.Name of evaporated medium:
Molecular Formula:
PH value:
|
Boiling point of evaporated medium:
℃ ;Need to recycle: Yse
、No
|
|
5. Initial moisture content of material:
% ;Including crystal water:
|
Moisture content after drying:
% ;Residual crystal water:
|
|
6. Initial material temperature:
℃ ;After drying temperature:
℃。Whether or not to use cooling: Yes
、No
|
|
7.The maximum temperature that can be reached when the material is dry:
℃;Optimum temperature range for material drying:
℃ |
|
8.Softening temperature of material:
℃;The melting point of material:
℃ |
|
9.Specific heat of material:
KJ/kg. ℃;Thermal conductivity of material:
KJ/m2.h. ℃ |
|
10.True density of material:
kg/m3,Bulk density of material:
kg/m3 |
|
11.Particle size distribution:
mm(mesh)to
mm(mesh);Proportional content≥
%
|
The maximum size
mm(mesh);Proportional content≥
% |
Minimum granularity:
mm(mesh);Proportional content≥
% |
|
12.Requirements for dry finished product size:
mm (mesh) |
|
13.Raw material viscosity:
CPS (CP); whether the heating port to reduce viscosity: Yes
、No
|
|
14.Dry material form can be destroyed: can
May not
|
|
15.Dry product yield:
kg/h (Wet material handling:
kg/h) |
|
16.Drying requirements:
Continuous drying 、
Gap drying 、
Dynamic drying 、
Static drying 、 |
Hot-air drying 、
vacuum drying 、
microwave drying 、Other:
|
|
17.Drying method of material in the past or drying method of similar product :
|
Type of dryer to be used:
|
|
18.Air intake requirements:
Natural folk songs ,
300 thousand stage filtration,
100 thousand stage filtration,
10 thousand stage filtration, Other:
|
|
19.Material requirements for drying equipment:
Material contact is stainless steel 、
All stainless steel 、
Titanium 、 |
Aluminium alloy 、
Carbon steel 、
Glass lined 、
PTFE 、 Other:
|
|
20.Stainless steel model:
SUS304 ,
SUS321 ,
SUS316 ,
SUS316L,
SUS2235 , |
Other:
|
|
21.Material recovery requirements:≥
%;Dust emission requirements:≤
mg/nm3 ; |
Exhaust emission requirements:≤
mg/nm3;Maximum allowable discharge of wastewater and waste liquid≤
mg/L |
|
22.Hot medium and heat source used in drying process
℃ ; Steam
Mpa; Heat conducting oil
℃; |
Electric heating
、Coal stove
、Hot blast stove
、Gas stove
、Other:
|
|
23.Heat medium and heat source
、Buy
、Matching purchase
、Other:
|
|
24.Cleaning and sanitation requirements for equipment:
|
|
25.Equipment usage:
、Altitude:
、Humidity:
、Maximum temperature:
、 |
Minimum temperature:
、Annual temperature:
、Other:
|
|
26.Budget for investment in equipment (RMB):
Million yuan |
|
27.Other Requirements:
|
Verification Code:
Can't see clearly? |
|
|
|