The three-dimensional motion mixer is compared with the v-type mixer

V-type mixer is only 40-50% of the filling factor, such as v-type mixer such as container rotary mixer, the container material is through the accumulation or alternating ups and downs to change the material asked the mutual position, in order to make the material There is a decentralized space, the container must have a larger volume, and thus the amount of material loading has a certain limit, generally 40% -50%.
The structure and operation characteristics of the three-dimensional motion mixer make the material in the container periodically rotate, reverse and shake the three-dimensional movement, with the characteristics of alternating pulsation to continuously move the material, material convection, diffusion is very full, even if Filling factor is very high (generally up to 80%), but also in a very short period of time to achieve a higher degree of mixing.
In addition, V-type mixer is a container rotary gravity mixer, there is a critical speed limit, so the speed can not be too high, only by prolonging the mixing time to ensure a certain degree of mixing, and three-dimensional motion mixer its movement is complex, Critical speed limit, the speed can be very high, so its efficiency is high.
Therefore, the same type of three-dimensional motion mixer production is higher than the v-type mixer, mixing uniformity is better than the V-shaped mixer.