Different material states use different three-dimensional motion mixers

1, poor mobility, mutual adhesion of particles or powdery solid, you often need to use mechanical flip and pressure, roll and other movements of the mixer, this situation is generally used slotted mixer.
2, the general mobility, the proportion of relatively large material by the simple rotation is not enough, the need for multi-directional multi-angle role can be fully mixed, this situation is generally the use of three-dimensional motion mixer or multi-dimensional mixer.
3, the flow of good granular solid is mainly by the container itself, or by moving in the container moving parts of the role of repeated flip, blending and be mixed, this situation is generally used V-type mixer.
The three-dimensional motion mixer can mix a variety of materials into a homogeneous mixture, such as in the pharmaceutical industry, to mix the ingredients of the different ingredients together; also increase the material contact surface area to promote the chemical reaction; also to accelerate the physical changes, such as granular Solute by adding solvent, through the role of mixing machinery can be accelerated dissolve and mix.
Powder, granular solid material mixers are mostly intermittent operation, the current market are V-type mixer, three-dimensional sports mixer and tank-type mixer three models, mixed with all the materials involved in the mixed evenly distributed, mixed The degree is divided into ideal mixing, random mixing and completely unmixed three states.
Three-dimensional sports mixer evaluation of good or bad:
A, uniformity: analysis of material quality of good or bad, obtained by probability theory, mixing uniformity is determined by the type of mixer. B, dead angle: refers to the material in the mixing container can not participate in the mixing of the physical phenomenon, dead angle percentage is to evaluate the quality of the mixer to create good or bad. C, mixing time: the physical quantity of the mixing speed, refers to the time when the different materials are mixed into the mixing to reach the uniformity requirements. The mixing time is determined by the type and type of the mixer.
Three-dimensional sports mixer use and maintenance
1, the installation: the machine placed smoothly, installed machine feet, pad flat, so that mechanical operation can be freely. 
2, before the first use of the oil should be added at the oil, and then no-load operation, check the fasteners are loose, electrical normal, whether the normal operation of the machine, if abnormal, to refurbish and debug. 
3, the feeding port to the top, open the feeding cap for feeding, feeding capacity can not exceed the specified volume, and then close the feeding cover, start the machine to run, the way if abnormal, must be shut down to check. 
4, after get off work or replacement of the species must be inside and outside the hopper rinse.