Eight steps to fully check the efficient boiling dryer

1, efficient boiling dryer bearing and gear life, generally 2-3 years. Cycloid reducer lubrication to be regularly check the oil level, the normal oil level at 1 / 2-2 / 3, the new equipment in full operation after 50 hours after the oil change. According to the efficient boiling dryer cleaning procedures to improve equipment hygiene.
  

2, each class check the oil once, if the lack of oil in time to add. The main transmission box, distribution box, the transmission part of the gear oil, grease to be checked once a half. Add or replace gear oil, grease as appropriate. Spiral shaft bottom bearing running 500 hours after the demolition time, (the new machine running 100 hours after the demolition of a), assembly and disassembly, if found damaged should be replaced. Should strictly check the bearing plus grease situation. Press the high-efficiency boiling dryer maintenance program to maintain good equipment.

3, check the efficient boiling dryer parts are intact, and according to high efficiency boiling dryer disinfection procedures for disinfection. Equipment, hands, feet and objects shall not be inserted into the cone, to prevent accidents. The upper sampling when you need to stop, such as the discovery of a hard foreign body into the machine, should be timely parking, discharge and then drive.

4, check the efficient and efficient boiling dryer air compressor whether to add lubricating oil, storage tank whether there is cooling water, if any will be exhausted.
 
5, install the bag and other parts, turn on the power, check the automatic, manual switch is flexible, and set the relevant data.
  
6, the preparation of good wet granules in a timely manner to promote efficient boiling dryer, open the efficient boiling dryer to dry, and strictly control the amount of dry wet particles per day does not exceed 100 kg, control the drying temperature and time.
 
7, drying process through the window at any time to grasp the dry particles, and according to the process of control the whole process of drying.
 
8, dry finished, close the efficient boiling dryer power, pour out the material in the dryer.