Double cone vacuum dryer on the use of the environment requirements

Double cone vacuum dryer on the use of the environment requirements:
Double cone vacuum dryer should be in the relative humidity ≤ 85% RH, around the non-corrosive vacuum dryer gas, no strong vibration source and strong electromagnetic field used in the environment. If the material is wet, it is best to add a filter between the vacuum chamber and the vacuum pump of the double cone vacuum dryer to prevent the humid gas from entering the vacuum pump, causing the vacuum pump to malfunction.
Double cone vacuum dryer in the production and use of the equipment should pay attention to the maintenance and operation.
Double cone vacuum dryer after repeated use, will produce a phenomenon can not be vacuum, then replace the door seal or adjust the box on the door out of the distance to solve. When the vacuum box double cone vacuum dryer temperature is higher than 200 ℃, will produce slow air leakage phenomenon (except 6050,6050B, 6051,6053 outside), then open the box double cone vacuum dryer behind the cover with hexagon Wrench loosen the heater base, replace the seal or tighten the heater base to solve.
Vacuum pump can not work for a long time, so when the vacuum reaches the requirements of double cone vacuum dryer items, should first turn off the vacuum valve, and then turn off the vacuum pump power, vacuum to be less than double cone vacuum dryer items, and then open the vacuum valve and vacuum pump Power, continue to vacuum, so that can extend the life of the vacuum pump.
Double cone vacuum dryer items such as double cone vacuum dryer after the change to light weight, small size (for small particles), should be in the studio vacuum port plus barrier network to prevent the double cone vacuum drying machine inhalation Damage to vacuum pump (or solenoid valve).
In addition to maintenance, can not open the double cone vacuum dryer left side of the box cover (except 6090 and 6210) to avoid damage to electrical control system. Double cone vacuum dryer should always be kept clean. The door glass should not be wiped with a reactive chemical solution, wipe with a soft cotton cloth. Double cone vacuum dryer studio without explosion-proof, anti-corrosion treatment, shall not be easy, explosive, easy to produce corrosive gas items.
If the double cone vacuum drying machine is not used for a long time, will be exposed to the outside of the plating parts coated with neutral grease, to prevent corrosion, and put on plastic film dust cover, placed in the double cone vacuum dryer room, so as not to Electrical components damaged by moisture, affecting the use.
    Double cone vacuum dryer for the double cone of the tank, the tank in a vacuum state, into the jacket through the steam or hot water for heating, heat through the tank wall and wet material contact, wet material after evaporation of water vapor , Through the vacuum pump by the vacuum exhaust pipe was taken away. As the tank is in a vacuum state, and the tank of the material constantly up and down inside and outside the flip, thus speeding up the drying speed of materials to improve drying efficiency, to achieve the purpose of uniform drying. Efficient conventional vacuum drying equipment are used for steam heating, need to heat from the inside to the outside, heating speed need to consume a lot of coal, and double cone vacuum dryer is used in electromagnetic heating, no heat transfer medium, directly heated to the object Internal, heating speed, 1 kilowatts can be in the 3-5 minutes of water at room temperature plus vacuum dryer is integrated to enhance the technical management is the key to heat to 100 ℃, to avoid the above shortcomings, so fast, efficient, dry Cycle greatly reduced, lower energy consumption. Double cone vacuum dryer heating evenly due to heating, from the inside to the outside of the material at the same time heating, the material inside and outside the temperature difference is very small, does not produce conventional heating inside and outside the heating inconsistency of the situation, resulting in puffing effect, , So that greatly improve the quality of drying.